pav087
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
[liveuser@localhost ~]$ su
[root@localhost liveuser]# lsscsi
[0:0:0:0] cd/dvd ASUS DRW-24D5MT 1.00 /dev/sr0
[1:0:0:0] disk ATA ST500DM002-1BD14 KC45 /dev/sda
[4:0:0:0] disk ATA SandForce{200026 20DA /dev/sdb
[6:0:0:0] disk SMI USB DISK 1100 /dev/sdc
[7:0:0:0] disk ST750LM0 22 HN-M750MBB /dev/sdd
[root@localhost liveuser]# /media/A608A52D08A4FE05/ssd/Ready_Vertex3/SF_Genesis-v1.5.21.20110919-fc14-32bit/SF_Genesis -PROCESS_SSD 4:0:0:0 /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29204.0.driveconfig 12345 www_123 log=/media/A608A52D08A4FE05/ssd/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.5.21.20110919-fc14-32bit
SF_Core Library: v1.7.0.20110919-fc14-32bit
Copyright 2010-2011, SandForce Inc., All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 04/24/2018 15:36:36] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29204.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/A608A52D08A4FE05/ssd/fw.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 04/24/2018 15:36:36] - Instructing the operating system to purge any existing cached data for device: '4:0:0:0'
[Tue 04/24/2018 15:36:41] - Issuing a discovery command for device: '4:0:0:0'
[Tue 04/24/2018 15:36:46] - Discovery command completed...
[Tue 04/24/2018 15:36:46] - Waiting 5 seconds for the system to settle...
[Tue 04/24/2018 15:36:51] - Device designation string '4:0:0:0' is mapped to node '/dev/sg2'
[Tue 04/24/2018 15:36:51] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29204.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 04/24/2018 15:36:51] - Successfully received the IDENTIFY data from the drive...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SF_Internal_PackageManager::OpenExisting:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
HeaderCRC32: -1259342416,(B4EFF5B0)
_Package.Header.HeaderCRC32: -1259342416,(B4EFF5B0)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OverallCRC32: 1442013745,(55F36231)
_Package.Header.OverallCRC32: 1442013745,(55F36231)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 04/24/2018 15:37:01] - Successfully opened the package: /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Tue 04/24/2018 15:37:01] - Successfully extracted *.DriveConfig file: /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29204.0.driveconfig
[Tue 04/24/2018 15:37:01] - Extracted Config_ID: 1 (29204) in DriveConfig file: /media/A608A52D08A4FE05/ssd/1/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/29204.0.driveconfig
[Tue 04/24/2018 15:37:01] - Extracted SerialOutputControl: 0
[Tue 04/24/2018 15:37:01] - Successfully extracted Config record: 29204
[Tue 04/24/2018 15:37:01] - Successfully extracted flashware image: 29204_fw_cl_mlc_Toshiba_BBR6_64Gb_FT64G08UCT18B_2Q_1C_1D_PP_R01926_s512.vic
[Tue 04/24/2018 15:37:01] - Successfully extracted manufacturing image: 29204_mf_mlc_Toshiba_BBR6_64Gb_FT64G08UCT18B_2Q_1C_1D_PP_R01926_s512.vic
[Tue 04/24/2018 15:37:01] - Proceeding in ROM mode, download feature 1...
[Tue 04/24/2018 15:37:01] - Successfully downloaded MFB to the drive...
[Tue 04/24/2018 15:37:01] - Waiting (5 sec) for the drive to settle...
[Tue 04/24/2018 15:37:06] - Successfully received the IDENTIFY data from the drive...
[Tue 04/24/2018 15:37:06] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Tue 04/24/2018 15:37:06] - Successfully enabled SMART capabilities...
[Tue 04/24/2018 15:37:07] - Successfully issued a diagnostic unlock...
[Tue 04/24/2018 15:37:07] - Performing the flash test of block 0 (0x0000)...
[Tue 04/24/2018 15:37:10] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 1
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 0
Number of Passed with warnings: 4
No. Passed without warnings: 4
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 04/24/2018 15:37:11] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 117231408
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 56984 (0xDE98)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 04/24/2018 15:37:26] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format))
[Tue 04/24/2018 15:37:26] - End of Genesis manufacturing log.
[Tue 04/24/2018 15:37:26] - Exiting...
[Tue 04/24/2018 15:37:26] - Overall Result for Device: /dev/sg2 ****** FAIL ******
[root@localhost liveuser]#
|
Всего записей: 6 | Зарегистр. 23-11-2007 | Отправлено: 16:43 24-04-2018 | Исправлено: pav087, 16:44 24-04-2018 |
|
