Kvert007
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
На 21062 вот что получил
[root@localhost SF_Genesis-v1.7.0.01020130612-fc14-32bit]# ./SF_Genesis -PROCESS_SSD 5:0:0:0 '/mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp' '/mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/20004^C.driveconfig' 12345 www_123 log=/home/1.txt
[root@localhost SF_Genesis-v1.7.0.01020130612-fc14-32bit]# lsscsi
[2:0:0:0] disk ATA TS128GSSD720 5.0. /dev/sda
[3:0:0:0] disk ATA WDC WD20EZRX-00D 80.0 /dev/sdb
[5:0:0:0] disk ATA SandForce{200026 306A /dev/sdc
[6:0:0:0] disk JetFlash Transcend 4GB 8.07 /dev/sdd
[root@localhost SF_Genesis-v1.7.0.01020130612-fc14-32bit]# ./SF_Genesis -PROCESS_SSD 5:0:0:0 '/mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp' '/mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/21062.0.driveconfig' 12345 www_123 log=/home/1.txt
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 04/04/2018 20:16:59] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 5:0:0:0
argv[3]: /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
argv[4]: /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/21062.0.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/home/1.txt
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 04/04/2018 20:16:59] - Instructing the operating system to purge any existing cached data for device: '5:0:0:0'
[Wed 04/04/2018 20:17:04] - Issuing a discovery command for device: '5:0:0:0'
[Wed 04/04/2018 20:17:09] - Discovery command completed...
[Wed 04/04/2018 20:17:09] - Waiting 5 seconds for the system to settle...
[Wed 04/04/2018 20:17:14] - Device designation string '5:0:0:0' is mapped to node '/dev/sg2'
[Wed 04/04/2018 20:17:14] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
Configuration File = /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/21062.0.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 04/04/2018 20:17:14] - Successfully received the IDENTIFY data from the drive...
[Wed 04/04/2018 20:17:14] - Validating Manufacturing Firmware Package: /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
[Wed 04/04/2018 20:17:38] - Successfully opened the package: /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp
[Wed 04/04/2018 20:17:38] - file /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/21062.0.driveconfig Loaded successfully
[Wed 04/04/2018 20:17:38] - Warning: Unable to query diagnostics information to perform power management settings check
[Wed 04/04/2018 20:17:38] - B01 Power Management configuration request detected
[Wed 04/04/2018 20:17:38] - Successfully extracted *.DriveConfig file: /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/21062.0.driveconfig
[Wed 04/04/2018 20:17:38] - Extracted Config_ID: 1 (21062) in DriveConfig file: /mnt/sf/FW/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/21062.0.driveconfig
[Wed 04/04/2018 20:17:38] - Extracted SerialOutputControl: 0
[Wed 04/04/2018 20:17:38] - Searching for flashware image for configuration 21062
[Wed 04/04/2018 20:17:38] - Manifest found for configuration 21062
[Wed 04/04/2018 20:17:38] - Flashware image extracted: 21062_fw_cl_ccmlc_Intel_64Gb_JS29F64G08ACME2_1Q_1C_1D_PP_R00419_s512.vic
[Wed 04/04/2018 20:17:38] - Searching for manufacturing image for configuration 21062
[Wed 04/04/2018 20:17:38] - Manifest found for configuration 21062
[Wed 04/04/2018 20:17:38] - Manufacturing image extracted: 21062_mf_ccmlc_Intel_64Gb_JS29F64G08ACME2_1Q_1C_1D_PP_R00419_s512.vic
[Wed 04/04/2018 20:17:38] - Proceeding in ROM mode, download feature 3...
[Wed 04/04/2018 20:17:38] - Successfully downloaded MFB to the drive...
[Wed 04/04/2018 20:17:38] - Waiting (5 sec) for the drive to settle...
[Wed 04/04/2018 20:17:43] - Successfully received the IDENTIFY data from the drive...
[Wed 04/04/2018 20:17:43] - Firmware revision reported to be: '60AABBM0'. This indicates MFB download was successful.
[Wed 04/04/2018 20:17:43] - Successfully enabled SMART capabilities...
[Wed 04/04/2018 20:17:45] - Successfully issued a diagnostic unlock...
[Wed 04/04/2018 20:17:46] - Performing the flash test of block 0 (0x0000)...
[Wed 04/04/2018 20:17:47] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 1
Chip Enabled Count: 1
Die Count: 1
Lane Count: 3
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 3
Number of failures: 0
Number of Passed with warnings: 1
No. Passed without warnings: 2
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 04/04/2018 20:17:47] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 46905264
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 34953 (0x8889)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 04/04/2018 20:18:57] - FORMAT command completed...
[Wed 04/04/2018 20:18:57] - Waiting (2 sec) for the drive to settle...
[Wed 04/04/2018 20:18:59] - Setting up the stamp information through CDU command...
[Wed 04/04/2018 20:18:59] - FATAL_ERROR: Could not perform the ReadDriveConfigUnique() operation on the drive... (0x12000004:SF_SG_HOST_BAD_TARGET_ERROR)
[Wed 04/04/2018 20:18:59] - End of Genesis manufacturing log.
[Wed 04/04/2018 20:18:59] - Exiting...
[Wed 04/04/2018 20:18:59] - Overall Result for Device: /dev/sg2 ****** FAIL ******
|
