nuToH4uK
Newbie | Ðåäàêòèðîâàòü | Ïðîôèëü | Ñîîáùåíèå | Öèòèðîâàòü | Ñîîáùèòü ìîäåðàòîðó
[more] wlo
Î÷èñòèë ÷åðåç Parted Magic
Òåïåðü äèñê íå âèäèò â ñèñòåìå. Íî â áèîñå è ìàãèêå åù¸ âèäåí.Ïîäêëþ÷èë ÷åðåp USB ñêîðîñòü òàêàÿ æå
Parted Magic 2018_01_08 (hdparm v9.52) Secure Erase Log
Started: Mon Mar 19 14:47:28 CDT 2018
Finished: Mon Mar 19 14:47:33 CDT 2018
KINGMAX SSD 60GB (/dev/sda) SERIAL NUMBER: 2012111317036000128 SIZE:55.9G RESULTS:Successfully Erased
Secure Erase Method: Normal Secure Erase
Parted Magic 2018_01_08 (hdparm v9.52) Secure Erase Log
Started: Mon Mar 19 14:47:28 CDT 2018
Finished: Mon Mar 19 14:47:33 CDT 2018
KINGMAX SSD 60GB (/dev/sda) SERIAL NUMBER: 2012111317036000128 SIZE:55.9G RESULTS:Successfully Erased
Secure Erase Method: Normal Secure Erase
==================================================
KINGMAX SSD 60GB (/dev/sda)
==================================================
hdparm v9.52
/dev/sda:
ATA device, with non-removable media
Model Number: KINGMAX SSD 60GB
Serial Number: 2012111317036000128
Firmware Revision: N0911
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0110)
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 117231408
LBA48 user addressable sectors: 117231408
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 57241 MBytes
device size with M = 1000*1000: 60022 MBytes (60 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
Write-Read-Verify feature set
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
unknown 119[6]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
* Host automatic Partial to Slumber transitions
* Device automatic Partial to Slumber transitions
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Data Tables (AC5)
* DOWNLOAD MICROCODE DMA command
* SET MAX SETPASSWORD/UNLOCK DMA commands
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 1 block)
* Deterministic read data after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 00232d0000000000
NAA : 0
IEEE OUI : 0232d0
Unique ID : 000000000
Checksum: correct
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.14.11-pmagic64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KINGMAX SSD 60GB
Serial Number: 2012111317036000128
LU WWN Device Id: 0 0232d0 000000000
Firmware Version: N0911
User Capacity: 60,022,480,896 bytes [60.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Mar 19 14:47:33 2018 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 120 120 050 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1342 (84 254 0)
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19
171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 69
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 47
181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 026 045 000 Old_age Always - 26 (Min/Max 6/45)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 0
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 0
230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 043 043 010 Pre-fail Always - 34359738368
233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 67560
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 8793
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 8793
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 14100
SMART Error Log not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
Âñåãî çàïèñåé: 3 | Çàðåãèñòð. 18-03-2018 | Îòïðàâëåíî: 15:15 19-03-2018 | Èñïðàâëåíî: nuToH4uK, 15:16 19-03-2018 |
|
