Den4al
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Цитата: просто шить этими конфигами. | Прошиваю конфигом 33263, пишет: [Sat 03/30/2019 08:05:00] - Successfully received the IDENTIFY data from the drive... [Sat 03/30/2019 08:05:00] - Validating Manufacturing Firmware Package: /media/RFREMIX-14-/111/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp [Sat 03/30/2019 08:07:53] - Successfully opened the package: /media/RFREMIX-14-/111/FW_PPRO_6_0_A_Release.1134440.release--0/FW_PPRO_6_0_A_Release.1134440.release.0.mfp [Sat 03/30/2019 08:07:53] - file /media/RFREMIX-14-/111/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33263.0.driveconfig Loaded successfully [Sat 03/30/2019 08:07:54] - Warning: Unable to query diagnostics information to perform power management settings check [Sat 03/30/2019 08:07:54] - B01 Power Management configuration request detected [Sat 03/30/2019 08:07:54] - Successfully extracted *.DriveConfig file: /media/RFREMIX-14-/111/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33263.0.driveconfig [Sat 03/30/2019 08:07:54] - Extracted Config_ID: 1 (33263) in DriveConfig file: /media/RFREMIX-14-/111/FW_PPRO_6_0_A_Release.1134440.release--0/Configuration_Files/33263.0.driveconfig [Sat 03/30/2019 08:07:54] - Extracted SerialOutputControl: 0 [Sat 03/30/2019 08:07:57] - Searching for flashware image for configuration 33263 [Sat 03/30/2019 08:07:57] - Manifest found for configuration 33263 [Sat 03/30/2019 08:07:57] - Flashware image extracted: 33263_fw_cl_mlc_Micron_128Gb_33bit_MT29F128G08CBECB_2Q_1C_1D_PP_R02825_s512.vic [Sat 03/30/2019 08:07:57] - Searching for manufacturing image for configuration 33263 [Sat 03/30/2019 08:07:57] - Manifest found for configuration 33263 [Sat 03/30/2019 08:07:57] - Manufacturing image extracted: 33263_mf_mlc_Micron_128Gb_33bit_MT29F128G08CBECB_2Q_1C_1D_PP_R02825_s512.vic [Sat 03/30/2019 08:07:57] - Proceeding in ROM mode, download feature 3... [Sat 03/30/2019 08:07:57] - Successfully downloaded MFB to the drive... [Sat 03/30/2019 08:07:57] - Waiting (5 sec) for the drive to settle... [Sat 03/30/2019 08:08:02] - Successfully received the IDENTIFY data from the drive... [Sat 03/30/2019 08:08:02] - Firmware revision reported to be: '60AABBM0'. This indicates MFB download was successful. [Sat 03/30/2019 08:08:02] - Successfully enabled SMART capabilities... [Sat 03/30/2019 08:08:04] - Successfully issued a diagnostic unlock... [Sat 03/30/2019 08:08:05] - Performing the flash test of block 0 (0x0000)... [Sat 03/30/2019 08:08:08] - Flash Test Results: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ----------------------------------------------------------------------------- Flash Test Parameters: ----------------------------------------------------------------------------- Block Count: 0 Page Count: 1 Bus Count: 2 Chip Enabled Count: 1 Die Count: 1 Lane Count: 3 Plane Count: 2 ----------------------------------------------------------------------------- Results Notes: ----------------------- N1 - At least one page tested and passed with no bit errors. N2 - No test data available. Test may have aborted, or failed during the testing. N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power. N4 - At least one erased page tested had bit error rate greater than half the correction power. N5 - Walking zeros test failed. N6 - Walking ones test failed. N7 - Block contained factory bad block markings and testing was skipped. N8 - At least one page tested and had bit error rate greater than the correction power on plane 0. N9 - Block in plane 0 was marked as a factory bad block. N10 - At least one page tested and had bit error rate greater than the correction power on plane 1. N11 - Block in plane 1 was marked as a factory bad block. ----------------------------------------------------------------------------- +------+------+------+------+--------+--------------------------------------------+---------+ | Bus | CE | Die | Lane | Value | Result Notes | Overall | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 0 | 0 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 1 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ | 1 | 0 | 0 | 2 | 0x0002 | N3 | WARNING | +------+------+------+------+--------+--------------------------------------------+---------+ ----------------------------------------------------------------------------- Total Number of test results: 6 Number of failures: 0 Number of Passed with warnings: 6 No. Passed without warnings: 0 ----------------------------------------------------------------------------- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sat 03/30/2019 08:08:08] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ MemoryWearCycleCapability = 0 CurrentPE_CycleCount = 0 LifeInSeconds = 0 LogicalCapacity = 175836528 SectorSize = 512 SectorAlignmentOffset = 0 ExpectedMemoryID = 33836 (0x842C) ExpectedNumDies = 0 SerialOutputControl = 0 Time[8] = 0x0000000000000000 MiscFlag_Erase_R_Block = 0 MiscFlag_PanicHandlingEnabled = 0 MiscFlag_PanicOnSATA_Error = 0 MiscFlag_WriteThrottlingTestMode = 0 MiscFlag_DisableUserBandECCX = 1 L_PageSize = 0 E_PageSize = 0 ErrorCorrectionPower = 0 ConfigDeviceReadDisturbCount = 0 ConfigDeviceReadDisturbCountLow = 0 ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Sat 03/30/2019 08:08:19] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format)) [Sat 03/30/2019 08:08:19] - End of Genesis manufacturing log. [Sat 03/30/2019 08:08:19] - Exiting... [Sat 03/30/2019 08:08:19] - Overall Result for Device: /dev/sg0 ****** FAIL ****** |