Перейти из форума на сайт.

НовостиФайловые архивы
ПоискАктивные темыТоп лист
ПравилаКто в on-line?
Вход Забыли пароль? Первый раз на этом сайте? Регистрация
Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 3)

Модерирует : Akam1, Dr_StandBy, vertex4

Akam1 (07-08-2019 07:22): http://forum.ru-board.com/topic.cgi?forum=84&topic=5471  Версия для печати • ПодписатьсяДобавить в закладки
На первую страницук этому сообщениюк последнему сообщению

   

Den4al

Newbie
Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
kingston hyperx fury 120gb, память FT16B08UCM1-4E (8 шт.)
Труп или можно восстановить?
 
[Fri 03/29/2019 18:55:06] - Successfully received the IDENTIFY data from the drive...
[Fri 03/29/2019 18:55:06] - Validating Manufacturing Firmware Package: /media/RFREMIX-14-/111/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Fri 03/29/2019 18:57:14] - Successfully opened the package: /media/RFREMIX-14-/111/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Fri 03/29/2019 18:57:14] - file  /media/RFREMIX-14-/111/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33205.0.driveconfig Loaded successfully
[Fri 03/29/2019 18:57:14] - Warning:  Unable to query diagnostics information to perform power management settings check
[Fri 03/29/2019 18:57:14] - B01 Power Management configuration request detected
[Fri 03/29/2019 18:57:14] - Successfully extracted *.DriveConfig file: /media/RFREMIX-14-/111/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33205.0.driveconfig
[Fri 03/29/2019 18:57:14] - Extracted Config_ID: 1 (33205) in DriveConfig file: /media/RFREMIX-14-/111/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/33205.0.driveconfig
[Fri 03/29/2019 18:57:14] - Extracted SerialOutputControl: 0
[Fri 03/29/2019 18:57:14] - Searching for flashware image for configuration 33205
[Fri 03/29/2019 18:57:14] - Manifest found for configuration 33205
[Fri 03/29/2019 18:57:14] - Flashware image extracted: 33205_fw_cl_mlc_Micron_128Gb_33bit_FT16B08UCM1-3B_2Q_1C_1D_PP_R02795_s512.vic
[Fri 03/29/2019 18:57:14] - Searching for manufacturing image for configuration 33205
[Fri 03/29/2019 18:57:14] - Manifest found for configuration 33205
[Fri 03/29/2019 18:57:14] - Manufacturing image extracted: 33205_mf_mlc_Micron_128Gb_33bit_FT16B08UCM1-3B_2Q_1C_1D_PP_R02795_s512.vic
[Fri 03/29/2019 18:57:14] - Proceeding in ROM mode, download feature 3...
[Fri 03/29/2019 18:57:15] - Successfully downloaded MFB to the drive...
[Fri 03/29/2019 18:57:15] - Waiting (5 sec) for the drive to settle...
[Fri 03/29/2019 18:57:20] - Successfully received the IDENTIFY data from the drive...
[Fri 03/29/2019 18:57:20] - Firmware revision reported to be: '582ABBM0'.  This indicates MFB download was successful.
[Fri 03/29/2019 18:57:20] - Successfully enabled SMART capabilities...
[Fri 03/29/2019 18:57:22] - Successfully issued a diagnostic unlock...
[Fri 03/29/2019 18:57:23] - Performing the flash test of block 0 (0x0000)...
[Fri 03/29/2019 18:57:24] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
 Flash Test Parameters:                              
-----------------------------------------------------------------------------
               Block Count: 0                      
                Page Count: 1                      
                 Bus Count: 2                      
        Chip Enabled Count: 1                      
                 Die Count: 1                      
                Lane Count: 4                      
               Plane Count: 2                      
-----------------------------------------------------------------------------
 Results Notes:                                      
-----------------------                              
   N1 - At least one page tested and passed with no bit errors.
   N2 - No test data available.  Test may have aborted, or failed during the testing.
   N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
   N4 - At least  one erased page tested had bit error rate greater than half the correction power.
   N5 - Walking zeros test failed.
   N6 - Walking ones test failed.
   N7 - Block contained factory bad block markings and testing was skipped.
   N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
   N9 - Block in plane 0 was marked as a factory bad block.
  N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
  N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
 
 
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus  | CE   | Die  | Lane | Value  | Result Notes                               | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0    | 0    | 0    | 3    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 0    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 1    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 2    | 0x0001 | N1                                         |    PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1    | 0    | 0    | 3    | 0x0374 | N4,N5,N6,N8,N10                            |    FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
 
 
-----------------------------------------------------------------------------
  Total Number of test results: 8                      
            Number of failures: 1                      
         Number of Passed with warnings: 0                      
      No. Passed without warnings: 7                      
-----------------------------------------------------------------------------
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
[Fri 03/29/2019 18:57:24] - End of Genesis manufacturing log.
[Fri 03/29/2019 18:57:24] - Exiting...
[Fri 03/29/2019 18:57:24] - Overall Result for Device: /dev/sg0 ****** FAIL ******

Всего записей: 5 | Зарегистр. 27-03-2019 | Отправлено: 20:36 29-03-2019 | Исправлено: Den4al, 20:40 29-03-2019
   

На первую страницук этому сообщениюк последнему сообщению

Компьютерный форум Ru.Board » Hardware » Магнитные носители информации » Ремонт SSD накопителей на контроллерах SandForce (часть 3)
Akam1 (07-08-2019 07:22): http://forum.ru-board.com/topic.cgi?forum=84&topic=5471


Реклама на форуме Ru.Board.

Powered by Ikonboard "v2.1.7b" © 2000 Ikonboard.com
Modified by Ru.B0ard
© Ru.B0ard 2000-2024

BitCoin: 1NGG1chHtUvrtEqjeerQCKDMUi6S6CG4iC

Рейтинг.ru