PNYSA
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
SRUTSSSSSSSS80
Цитата:| в шапке есть программа определения конфигурации |
Отлично! Помещаю внизу этого поста файлы sf_info.txt и sf_flash_id_rommode.txt. И, так как там указано "Used config: 27423", вопрос: где его взять? У меня в FW_PPRO_5_2_2_Release.672199.release--0 после 27354 идет 28004, а в FW_PPRO_5_8_2_Release.906190.release--0 самый большой номер - 23005. У всех так или я что-то потерял? Откуда у пользователя в этом посте мог взяться FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/27423.0.driveconfig ?
[more=sf_info.txt]
v0.4a
Drive: 1(ATA)
Model: SSD2SC240G3LC709B121-460P
Fw : 541ABBF0
Size : 228936 MB
--- SandForce specific ---
Signature : 253-253-33105
HW Revision : 500026BB (B04)
Try to unlock the drive (default)...
Drive unlocked (default)!
FW : [541ABBF0 ]
FW string : [B:FW_PPRO_540_20140114_739675:FW_PPRO_5_4_1_Release-750509 ]
Config file : [cfg/cfg_MLC_Intel_128Gb_generic_PF29F32B08MCMF3_2Q_2C_1D ]
ROM Revision: [400 ]
NAND ID : 0x89, 0x84, 0x64, 0x3c, 0xa5, 0x0, 0x0, 0x0
Page Size : 17600
NAND CE : 2
Sector/Page : 8
Die/CE : 1
Block/Die : 1024
Page/Block : 512
Raw Size : 536870912
NAND Max EC : 3000
Max PE Cycles : 3000
Cur PE Cycles : 284
Life In Seconds : 94608000 (3 year warranty)
LBA Size : 468862128
Sector Size : 512
Sector Align : +0
NAND ID : 0x89,0x84
Serial Output Control : Default(Off)
Erase R Block : Disable
Panic Handling Enabled : Disable
Panic On SATA Error : Disable
Write Throttling Test Mode: Disable
R.A.I.S.E. : Disable
Flash CE : 16
Bank00: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank01: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank02: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank03: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank04: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank05: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank06: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank07: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank08: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank09: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank10: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank11: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank12: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank13: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank14: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Bank15: 0x89,0x84,0x64,0x3c,0xa5,0x0,0x0,0x0 - Intel MLC 128Gb/CE 128Gb/die
Led Settings
Activity LED Polarity : 0 (Normal)
Fault LED Polarity : 0 (Normal)
LED Blink Rate : 0 (250ms)
Power Managment Settings
Power Management Version : 1 (B02)
PS1 Support : 0 (Default)
HIPM Support : 0 (Default)
DIPM Support : 0 (Default)
Auto-Partial to Slumber Timer for Active PS0 State : 0 (Default (10 ms))
Auto-Partial to Slumber Timer PS States other than PS0 : 0 (Default (0 ms))
HIPM Auto-Partial Slumber Behavior : 0 (Default)
w76b9 Supports Partial and Slumber IPM States (HIPM) : 0 (Default)
w76b13 Supports Host Automatic Partial to Slumber Transitions (HIPM) : 0 (Default)
w76b14 Supports Device Automatic Partial to Slumber Transitions (DIPM): 0 (Default)
w78b3 Supports Device Initiating Interface Power Management Request : 0 (Default)
Auto Quick Idle Timer : 0 (Default (50ms))
DIPM Slumber COMWAKE : 0 (Default (Disabled))
w79b7 Supports Device APS Software Settings Preservation (SSP) : 0 (Default)
w78b10 Supports DIPM Software Settings Preservation (SSP) : 0 (Default)
Auto PS1 : 0 (Default (750ms))
DevSleep Settings
DevSleep Support : 0 (Default)
DevSleep Wakeup with COMWAKE : 0 (Default)
Temperature Sensor Settings
Sensor 1:
Device ID : 0 (Default)
Device Address : 0
Max Temperature Threshold Level 1 Entry Point (MT1) : 0
Max Temperature Threshold Level 2 Entry Point (MT2) : 0
Min Temperature Threshold (LT1) : 0
Max Temperature Threshold Behavior for MT1 (MT1B) : 0 (Default)
Max Temperature Threshold Behavior for MT2 (MT2B) : 0 (Default)
Min Temperature Threshold Behavior (LT1B) : 0 (Default)
Max Temperature Threshold Level 1 Return Point (MTR1): 0
Sensor 2:
Device ID : 0 (Default)
Device Address : 0
Max Temperature Threshold Level 1 Entry Point (MT1) : 0
Max Temperature Threshold Level 2 Entry Point (MT2) : 0
Min Temperature Threshold (LT1) : 0
Max Temperature Threshold Behavior for MT1 (MT1B) : 0 (Default)
Max Temperature Threshold Behavior for MT2 (MT2B) : 0 (Default)
Min Temperature Threshold Behavior (LT1B) : 0 (Default)
Max Temperature Threshold Level 1 Return Point (MTR1): 0
Security Erase Options
Security Erase Behavior : 0 (Default)
Enhanced Security Erase Behavior (Military Erase) : 0 (Default)
SATA Command and Firmware Options
Flush Cache Behavior : 0 (Default)
ATA Security Set Enable : 0 (Default)
Spread Spectrum Clocking Enable : 0 (Default)
SATA Link Handling on Reboot : 0 (Default)
ACS2 Support : 0 (Default)
Failed Secure Unlock Delay Enable : 0 (Default(No delay))
Seek Complete in Error Status : 0 (Default)
Read Long with Retry and without Retry : 0 (Default)
Read Sectors without Retry : 0 (Default)
Write DMA without Retry : 0 (Default)
Write Long with Retry and without Retry : 0 (Default)
Max SATA Link Rate : 0 (Default)
Deterministic Trim Setting : 0 (Default)
Controller Drive Strength Rate : 0 (Default)
PHY Setting : 0 (Default)
Controller Slew Rate : 0 (Default)
Put SIG FIS Delay : 0 (Default)
Set Multiple Handling : 0 (Default)
TRIM Timer Abort : 0 (Enable(Default))
Trim Support/Setting Word 169 Bit 0 : 0 (Default(Firmware default setting))
RDD1 Optimization : 0 (Default)
Security Unlock Drive : 0 (Default(Compare Master Password))
Power Throttling Options
Average Power Level 0-100 : 0
Maximum Power Level 0-100 : 0
Power Throttling Upon Unsafe Shutdown : 0 (Default)
Dynamic Read Scrub
Read Scrub Enabled : 0 (Default (Enabled))
Dynamic Read Scrub End Range1 : 0
Dynamic Read Scrub Rate Range1 : 0
Dynamic Read Scrub End Range2 : 0
Dynamic Read Scrub Rate Range2 : 0
Dynamic Read Scrub End Range3 : 0
Dynamic Read Scrub Rate Range3 : 0
Dynamic Read Scrub End Range4 : 0
Dynamic Read Scrub Rate Range4 : 0
Low Level Format Settings
Max LBA Count for 512B Sectors : 468862128
Max LBA Count for 512B Plus DIFF Sectors : 0
Max LBA Count for 520B Sectors : 0
Max LBA Count for 524B : 0
Max LBA Count for 528B : 0
Max LBA Count for 4096 Sectors : 0
Max LBA Count for 4096 Plus DIFF Sectors : 0
Host Protected Area
Host Protected Access : 0 (Always Reset HPA State On COMRESET)
End of Life Behavior
Enable End of Life : 0 (Default (EOL Enabled))
EOL Threshold 1 Type : 0 (Default (SSD Life Left))
EOL Threshold 1 Percentage : 0
EOL Threshold 1 Behavior : 0 (Default (Light Write Throttling))
EOL Threshold 2 Type : 0 (Default (SSD Life Left))
EOL Threshold 1 Percentage : 0
EOL Threshold 1 Behavior : 0 (Default (Heavy Write Throttling))
CDU Smart settings: default
Fab Defect list entry : 13
Idx Bus CE Die Plane Block Lane3210 Defects
0 1 0 0 0 257 B___ 1
1 0 0 0 0 257 B___ 1
2 1 0 0 1 257 B___ 1
3 0 0 0 1 257 B___ 1
4 0 1 0 0 257 __B_ 1
5 0 1 0 1 257 __B_ 1
6 1 0 0 0 766 B___ 1
7 0 0 0 0 766 B___ 1
8 1 0 0 1 766 B___ 1
9 0 0 0 1 766 B___ 1
10 0 1 0 0 766 __B_ 1
11 0 1 0 1 766 __B_ 1
12 0 0 0 0 877 B___ 1
Fab Defects : 13
User Defect list entry: 0
Panic Dumps : 0
Panic Dumps list:
Idx Accurev SyncCode UnlockLevel Size DataSize EPA Log Ok CRC Ok
0 -1 0xffffffff 0xffffffff -1 -1 0x00080002 0x0000 0x0000
1 -1 0xffffffff 0xffffffff -1 -1 0x20080002 0x0000 0x0000
2 -1 0xffffffff 0xffffffff -1 -1 0x00080102 0x0000 0x0000
3 -1 0xffffffff 0xffffffff -1 -1 0x20080102 0x0000 0x0000
MST settings not exist.
MST result:
Format Version : 4
Test State : Not Activated
Input Offset : 96
Current Command : Erase
Cycles Required : 0
Cycles Complete : 0
ElapsedTime : 1
StartTemperature : 27
MaxTemperature : 49
Grown Bad Block : 0
Errors:
Program : 0
Correctable RAISE : 0
Uncorrectable RAISE: 0
Erase : 0
Unintended Erase : 0
Upper Page Program : 0
Lower Page Program : 0
0_Bit : 4479251158 80.01%
1_Bit : 964098861 17.22%
2_Bit : 137278391 2.45%
3_Bit : 15939381 0.28%
4_Bit : 1675813 0.03%
5_Bit : 175524
6_Bit : 22052
7_Bit : 6043
8_Bit : 3944
9_Bit : 3460
10_Bit : 3149
11_Bit : 2659
12_Bit : 2312
13_Bit : 1967
14_Bit : 1765
15_Bit : 1498
16_Bit : 1329
17_Bit : 1247
18_Bit : 1223
19_Bit : 1101
|
