justalex1
Junior Member | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору Доброго времени суток Танцы с бубном продолжаются Первая попытка печалька , ошибка сперезаписью , шо то не нравится память этой конфигурации . [root@localhost Alex]# /media/WINSETUP/1/SF_Genesis-v1.7.2.01020130925-RC-fc14-32bit/SF_GenesisDashboard -PROCESS_SSD 0:0:0:0 /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig 12345 www_123 log=/media/WINSETUP/500/Results_Test_PackageManager.log Qt: Session management error: None of the authentication protocols specified are supported [root@localhost Alex]# /media/WINSETUP/1/SF_Genesis-v1.7.2.01020130925-RC-fc14-32bit/SF_Genesis -PROCESS_SSD 0:0:0:0 /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig 12345 www_123 log=/media/WINSETUP/500/Results_Test_PackageManager.log~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit SF_Core Library: v1.7.1.20130612-fc14-32bit Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 11/22/2017 19:14:05] - SF_Genesis has been invoked with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ argv[1]: -PROCESS_SSD argv[2]: 0:0:0:0 argv[3]: /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp argv[4]: /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig argv[5]: 12345 argv[6]: www_123 argv[7]: log=/media/WINSETUP/500/Results_Test_PackageManager.log ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 11/22/2017 19:14:05] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0' [Wed 11/22/2017 19:14:10] - Issuing a discovery command for device: '0:0:0:0' [Wed 11/22/2017 19:14:15] - Discovery command completed... [Wed 11/22/2017 19:14:15] - Waiting 5 seconds for the system to settle... [Wed 11/22/2017 19:14:20] - Device designation string '0:0:0:0' is mapped to node '/dev/sg2' [Wed 11/22/2017 19:14:20] - Proceeding to process SSD device with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DeviceName = /dev/sg2 MFP Package Filename = /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp Configuration File = /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig Serial No. = 12345 World Wide Name = www_123 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 11/22/2017 19:14:20] - Successfully received the IDENTIFY data from the drive... [Wed 11/22/2017 19:14:20] - Validating Manufacturing Firmware Package: /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Wed 11/22/2017 19:14:45] - Successfully opened the package: /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp [Wed 11/22/2017 19:14:45] - file /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig Loaded successfully [Wed 11/22/2017 19:14:45] - Warning: Unable to query diagnostics information to perform power management settings check [Wed 11/22/2017 19:14:45] - B01 Power Management configuration request detected [Wed 11/22/2017 19:14:45] - Successfully extracted *.DriveConfig file: /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig [Wed 11/22/2017 19:14:45] - Extracted Config_ID: 1 (32037) in DriveConfig file: /media/WINSETUP/500/FW_PPRO_5_8_2_Release.906190.release--0/Configuration_Files/32037.0.driveconfig [Wed 11/22/2017 19:14:45] - Extracted SerialOutputControl: 0 [Wed 11/22/2017 19:14:45] - Searching for flashware image for configuration 32037 [Wed 11/22/2017 19:14:45] - Manifest found for configuration 32037 [Wed 11/22/2017 19:14:45] - Flashware image extracted: 32037_fw_cl_mlc_MIC_128Gb_MT29F512G08CKCAB_2Q_2C_2D_PP_R02242_s512.vic [Wed 11/22/2017 19:14:45] - Searching for manufacturing image for configuration 32037 [Wed 11/22/2017 19:14:45] - Manifest found for configuration 32037 [Wed 11/22/2017 19:14:45] - Manufacturing image extracted: 32037_mf_mlc_MIC_128Gb_MT29F512G08CKCAB_2Q_2C_2D_PP_R02242_s512.vic [Wed 11/22/2017 19:14:45] - Proceeding in ROM mode, download feature 3... [Wed 11/22/2017 19:15:51] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Extended Error data: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ATA COMMAND : 0x0092 (146) ATA FEATURE : 0x0003 (3) Device Status: 0x0001 (1) Driver Status: 0x0000 (0) Host Status: 0x0008 (8) ~~~~~~~~~~~~~~ Sense Data: ~~~~~~~~~~~~~~ 0 - No Sense: 114 (0x72) OK 1 - Recovered Error: 11 (0x0B) FAIL 2 - Not Ready: 0 (0x00) OK 3 - Medium Error: 0 (0x00) OK 4 - Hardware Error: 0 (0x00) OK 5 - Illegal Request: 0 (0x00) OK 6 - Unit Attention: 0 (0x00) OK 7 - Data Protect: 14 (0x0E) OK 8 - Blank Check: 9 (0x09) OK 9 - Vendor Specific: 12 (0x0C) OK 10 - Copy Aborted: 0 (0x00) OK 11 - Aborted Command: 0 (0x00) OK 12 - Equal Comparison: 0 (0x00) NA 13 - Volume Overflow: 0 (0x00) NA 14 - Miscompare: 0 (0x00) OK 15 - Reserved: 128 (0x80) NA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ System Trace: ~~~~~~~~~~~~~~~~ [104434.865544] ata1.00: status: { DRDY ERR } [104434.865552] ata1.00: error: { ABRT } [104434.865573] ata1.00: device reported invalid CHS sector 0 [104434.868242] sd 0:0:0:0: [sdc] START_STOP FAILED [104434.868289] sd 0:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [104434.868300] sd 0:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor] [104434.868314] sd 0:0:0:0: [sdc] Add. Sense: No additional sense information [104434.868458] ata1.00: disabled [104439.881535] ata1: hard resetting link [104440.187098] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [104440.188272] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [104440.188865] ata1.00: ATA-8: SandForce{200026BB}, 402ABBR0, max UDMA/133 [104440.188884] ata1.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [104440.193825] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [104440.195609] ata1.00: configured for UDMA/133 [104440.195653] ata1: EH complete [104440.196117] scsi 0:0:0:0: Direct-Access ATA SandForce{200026 402A PQ: 0 ANSI: 5 [104440.198856] sd 0:0:0:0: Attached scsi generic sg2 type 0 [104440.204654] sd 0:0:0:0: [sdc] 64 512-byte logical blocks: (32.7 kB/32.0 KiB) [104440.204672] sd 0:0:0:0: [sdc] 4096-byte physical blocks [104440.205185] sd 0:0:0:0: [sdc] Write Protect is off [104440.205201] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [104440.206127] sd 0:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [104440.209843] sdc: unknown partition table [104440.238890] sd 0:0:0:0: [sdc] Attached SCSI disk [104481.000140] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [104481.000163] ata1.00: failed command: DOWNLOAD MICROCODE [104481.000192] ata1.00: cmd 92/03:2f:00:00:02/00:00:00:00:00/00 tag 0 pio 24064 out [104481.000197] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout) [104481.000208] ata1.00: status: { DRDY } [104481.000229] ata1: hard resetting link [104486.354077] ata1: link is slow to respond, please be patient (ready=0) [104491.047096] ata1: COMRESET failed (errno=-16) [104491.047115] ata1: hard resetting link [104496.401120] ata1: link is slow to respond, please be patient (ready=0) [104501.093109] ata1: COMRESET failed (errno=-16) [104501.093128] ata1: hard resetting link [104506.449194] ata1: link is slow to respond, please be patient (ready=0) [104536.133182] ata1: COMRESET failed (errno=-16) [104536.133205] ata1: limiting SATA link speed to 1.5 Gbps [104536.133216] ata1: hard resetting link [104541.182070] ata1: COMRESET failed (errno=-16) [104541.182093] ata1: reset failed, giving up [104541.182108] ata1.00: disabled [104541.182186] ata1: EH complete ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 11/22/2017 19:15:51] - End of Genesis manufacturing log. [Wed 11/22/2017 19:15:51] - Exiting... [Wed 11/22/2017 19:15:51] - Overall Result for Device: /dev/sg2 ****** FAIL ****** |