HDD: Служебки, ПЗУ, модули, лоадеры, firmware, flash (#3) - [544] :: Магнитные носители информации

Кстати по поводу Savvio 10k.4 SS9600204SS (фирмварь 5f06)

Подсовываю ему прошивку FM0A через sasdupie c подправленной HEX редактором версией

( как это сделать - здесь - http://blog.eblend.ca/2015/04/flash-dell-firmware-into-seagate.html )

в результате получаю вот такую фигню :

Цитата:

<03/16/19, 08:00:07 AM>Striping Header - # of devices = 1
<03/16/19, 08:00:07 AM>Calling writeBuffer
<03/16/19, 08:00:07 AM>SASHardDriveDUPDevice::updateDevice: Using Full Download
<03/16/19, 08:00:07 AM>BufferSize=5f5e100
<03/16/19, 08:00:07 AM>BufferSize=5f5e100
<03/16/19, 08:00:07 AM>bufferSize=e4600 bufPointer=0
<03/16/19, 08:00:07 AM>bufferSize=e4600 bufPointer=0 BufferSize=5f5e100
<03/16/19, 08:00:07 AM>@2 bufferBytesToSend=e4600
<03/16/19, 08:00:07 AM>Sending e4600 bytes --- 0 to go
<03/16/19, 08:00:07 AM>bufPointer=0
<03/16/19, 08:00:07 AM>bufferBytesToSend=e4600
<03/16/19, 08:00:07 AM>doProcessLibCommand: Calling ProcessLibCommand
<03/16/19, 08:00:07 AM>ProcessLibCommand 2 calling ProcessLibCommand 1
<03/16/19, 08:00:07 AM>Starting ProcessLibCommand 1
<03/16/19, 08:00:07 AM>ProcessLibCommand 1: StoreLibIR Gen 2
<03/16/19, 08:00:07 AM>ProcessLibCommand 1: Is a StoreLib loaded?
<03/16/19, 08:00:07 AM>ProcessLibCommand 1: Calling LSI
<03/16/19, 08:00:07 AM>ProcessLibCommand 1: After Calling LSI
<03/16/19, 08:00:07 AM>ProcessLibCommand 2 Exit
<03/16/19, 08:00:07 AM>doProcessLibCommand: After Calling ProcessLibCommand
<03/16/19, 08:00:07 AM>WriteBuffer: Return code from ProcessLibCommand = 0
<03/16/19, 08:00:07 AM>SASHardDriveDUPDevice::writeBuffer 1: GOOD RC: but non-zero SCSIStatus=
<03/16/19, 08:00:07 AM>SASHardDriveDUPDevice::writeBuffer 1: SenseData=<03/16/19, 08:00:07 AM>70:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>5:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>13:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>26:<03/16/19, 08:00:07 AM>99:<03/16/19, 08:00:07 AM>2:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>0:<03/16/19, 08:00:07 AM>
<03/16/19, 08:00:07 AM>Got an error from writebuffer
<03/16/19, 08:00:07 AM>Finished writeBuffer
<03/16/19, 08:00:07 AM>DUPWrapper: updateDevice complete
<03/16/19, 08:00:07 AM><03/16/19, 08:00:07 AM>DUPWrapper:Device failed to update successfully

Менять контроллер? стоит SAS2008

Модерирует : Akam1, Dr_StandBy, vertex4
Версия для печати • Подписаться • Добавить в закладки
На первую страницу • к этому сообщению • к последнему сообщению