sashamalets
Newbie | Редактировать | Профиль | Сообщение | Цитировать | Сообщить модератору
установил это
Router#sh ver
Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-D-M), Version 12.2(29a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 12-Aug-05 21:12 by tinhuang
Image text-base: 0x8000808C, data-base: 0x80B5E5A4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:c2600-d-mz.122-29a.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 28672K/4096K bytes of memory
.
Processor board ID JAD042103PA (1872313449)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
--More--
Добавлено:
настроил все также. ситуация такая же
Router#sh ipce
Router#sh
Router#show ip
Router#show ip cef
Prefix Next Hop Interface
0.0.0.0/32 receive
192.168.1.0/24 attached Ethernet0/0.1
192.168.1.0/32 receive
192.168.1.100/32 receive
192.168.1.255/32 receive
192.168.20.0/24 attached Ethernet0/0.20
192.168.20.0/32 receive
192.168.20.100/32 receive
192.168.20.200/32 192.168.20.200 Ethernet0/0.20
192.168.20.255/32 receive
192.168.44.0/24 attached Ethernet0/0.44
192.168.44.0/32 receive
192.168.44.100/32 receive
192.168.44.200/32 192.168.44.200 Ethernet0/0.44
192.168.44.255/32 receive
224.0.0.0/4 drop
224.0.0.0/24 receive
255.255.255.255/32 receive
router
memory-size iomem 15
ip subnet-zero
ip cef
!
!
!
!
!
!
interface Ethernet0/0
no ip address
half-duplex
!
interface Ethernet0/0.1
encapsulation dot1Q 1 native
ip address 192.168.1.100 255.255.255.0
!
interface Ethernet0/0.20
encapsulation dot1Q 20
ip address 192.168.20.100 255.255.255.0
!
interface Ethernet0/0.44
encapsulation dot1Q 44
ip address 192.168.44.100 255.255.255.0
!
interface BRI0/0
no ip address
encapsulation hdlc
!
ip classless
no ip http server
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
Router#
Добавлено:
Router#sh v
Router#sh vl
Router#sh vlans
Virtual LAN ID: 1 (IEEE 802.1Q Encapsulation)
vLAN Trunk Interface: Ethernet0/0.1
This is configured as native Vlan for the following interface(s) :
Ethernet0/0
Protocols Configured: Address: Received: Transmitted:
IP 192.168.1.100 0 0
Virtual LAN ID: 20 (IEEE 802.1Q Encapsulation)
vLAN Trunk Interface: Ethernet0/0.20
Protocols Configured: Address: Received: Transmitted:
IP 192.168.20.100 15 10
Virtual LAN ID: 44 (IEEE 802.1Q Encapsulation)
vLAN Trunk Interface: Ethernet0/0.44
Protocols Configured: Address: Received: Transmitted:
--More--
Добавлено:
пробовал настроить маршрутизацию. не помогло.
ip classless
ip route 192.168.20.0 255.255.255.0 Ethernet0/0.44
ip route 192.168.44.0 255.255.255.0 Ethernet0/0.20
--More--
Добавлено:
switch
3500xl#sh run
Building configuration...
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname 3500xl
!
enable secret 5 $1$DNnu$01XjmawXDtUaGXVRp1O5R1
enable password 7 13091E1C0E4C0725256478736025070617475777
!
!
!
!
!
clock timezone utc 4
!
ip subnet-zero
no ip domain-lookup
!
!
!
interface FastEthernet0/1
!
interface FastEthernet0/2
switchport access vlan 20
!
interface FastEthernet0/3
!
interface FastEthernet0/4
switchport access vlan 44
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface VLAN1
description cisco 2 level
ip address 192.168.1.101 255.255.255.0
no ip directed-broadcast
no ip route-cache
!
ip default-gateway 192.168.1.100
banner exec ^C ^C
banner login ^C ^C
banner motd ^CC cisco-home-network ^C
!
line con 0
transport input none
stopbits 1
line vty 0 4
password 7 0253034F0A074B776D
login
line vty 5 15
password 7 0253034F0A074B776D
login
!
end
3500xl#
3500xl#sh vl
3500xl#sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/3, Fa0/5, Fa0/6,
Fa0/7, Fa0/8, Fa0/9, Fa0/10,
Fa0/11, Fa0/12, Fa0/13, Fa0/14,
Fa0/15, Fa0/16, Fa0/17, Fa0/18,
Fa0/19, Fa0/20, Fa0/21, Fa0/22,
Fa0/23, Gi0/1, Gi0/2
2 VLAN0002 active
10 cisco active
20 sasha20 active Fa0/2
44 sasha44 active Fa0/4
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
10 enet 100010 1500 - - - - - 0 0
20 enet 100020 1500 - - - - - 0 0
--More--
|
